Hi all,I currently configure wlc9800 with 4 ssid on it. In one of the wlan I use radius server for domain users to authenticate but I need to restrict them to connect only with their workstation laptops or tablets. I have all wlan MAC addresses avail...
Forum Posts
Resolved! ISSUE with WLC9800L radios down
Hi,I currently moved from Meraki to WLC9800 controller. after setting everything and joining AP to my site the ssid are not broadcasting and radios shows down status. because i am new to this controller need an urgent help.
how to add new Accest Point in EWC ?,
I am trying to Upgrade code on Cisco APs by moving the AP to a New Controller with Newer Code. This process is taking three hours per AP. I have hundreds of APs. Is this a known issue? Cisco suggests upgrading via console port on each ap, but tha...
Wanted to post this in case anyone else has a similar issue.. took us a week of troubleshooting. After upgrading from 17.3.5b to 17.9.3, clients are failing to join wireless if they leave one policy profile and join later on another one. shown in lo...
Hello AP9115 I have a question while setting up. SSID configuration completed and checked ping to AP-> Radius server However, the connection does not persist in the AP and clicking SSID does not connect or disconnects after attempting. ...
My accest point seri 9115AXE-FAP Name : AP6871.619E.C948Admin State : EnabledAP Mode : LocalAP Submode : Not ConfiguredLocation : default locationPrimary controller name : Secondary controller name :Tertiary controller name :AP join priority : 1IP Pr...
Hi Team,Can you pls help to understand how important is FT with WPA3-Enterprise , i know AES (CCMP) works with FT enable but GCMP does not support FT as per Cisco documents for WPA3 deployment. my questions are below ? currently my WLC IOS is 17.9.31...
Resolved! RMI+RP HA on C9800 Null interface erro
Hello,starting to configure a pair of c9800-80 WLC in HA Mode. I have RMI-RP enabled and things seems to be working. I can force a switchover and the controllers switch. The primary IP address remains and I can mange the WLC. The one issue I am se...
Hi Professionals,I'm trying to migrating my WLC from 2504(old) to 9800(new).I have 40 APs for the office/plant and all APs are joined to old one.My plan is disconnect joining from old one to new WLC one by one, which means 2504 and 9800 should be up ...
Hi, It came to my notice that many 9100 series AP's (multple models) have put their 2,4Ghz radio in monitor mode. For a certain site I'm pretty sure that it will lead to coverage issues because too many AP's are in monitoring mode. Luckily it is not ...
Good afternoon, I have a C9124AXE-ROW access point which is not radiating in the 5GHz band. It is associated with a C9800-40 controller with version 17.9.4 Country is MX I have connected in these ports the antennas (AIR-ANT2568VG-NS) and the port RJ4...
Resolved! To Enable BLE Radio in CW9166 AP
Hi,How can we enable BLE Radio in CW9166 Access Point, can we do it through C9800-CL WLC or AP CLI?
Hi,Is it possible to use the wireless LAN controller in 9300L without enabling routing on it? The switch works as an access switch with multiple VLANs and is connected to an HP Core Switch.Thanks.
Hello, I have assigned tags to my AP, it is registered and admin status is Enabled. The radioes had admin Enabled but operational status Down. Even though It is up now so I do not see any SSIDs What may be a reason behind that ?
