Wireless

Im interested in installing a Cisco 4400 series Wireless LAN Controller for up to 12 APs but I am having trouble finding information on the functional\management\configuration differences in using the controller with\without WCS. If anyone can point ...

I've not been able to find any OIDs on a controller to be able to tell what clients are associated to what APs in a lightweight system.Anyone know if this is possible and if so what are they?thanks,

I'm looking for an SNMP variable that will give me a list of the APs associated with a WiSM controller. It looks to me like I want some of the values from CISCO-LWAPP-AP-MIB (1.3.6.1.4.1.9.9.513). However when I query the controller it claims that ...

Have some 20 Compaq EVO N600c and N410c with Multiport W200 wireless adapter installed that now crashes in Windows XP sp2 (using 801.x 128bit WEP). Switching off the adapter "cure" this but isnt very practical...This began some weeks ago and didnt fi...

This may seem like a basic question, but how can there be "Rogue Clients" if the system is setup for open authentication?Is this even possible?I am asking this because two Rogue Clients have appeared in the system and it is unclear what these are. I...

Because WISM module support LAG protocol over its 4 gigabit links (will be seen by only 1 link), I don't think I have to activate the spanning tree over those. Am I right, any others considerations for that ?

Is it possible to configure a Cisco Aironet 1200 as transmit or receive only?

Hi All,I want to beat out some questions that I cannot find exactly guideline in Cisco. I intend to implement 2 Airespace 2000 controller and some 1010s and one 1030 to my main office and branch office. At present, there is a 512kbps WAN link between...

I am troubleshooting an issue with a wireless LAN that consists of 9 identical 1200 series AP's. All 9 AP's are configured the same except for IP and Hostname. There are 74 Wireless users at this site, they are required to authenticate to the AP's u...

Hi,I have one 4402-12 that is currently running 3.2, but I would like to use 4.0 instead. I have been told that it's not possible but I'm interested to hear your opinions.Thanks!

I Have 2 Cisco 1242 Access Point my users complain that their connection drops when they move within the building , as far as i know both AP are placed in such a manner that users connection auotmatically hops between both AP . Can some body Advise m...

We have a wireless setup including a Cisco ACS RADIUS server. I was checking the reports and under "Failed Attempts" , I found a failed attempt of description "Unknows NAS" and NAS IP address which does not belong to our network.Can someone explain m...