Wireless

Hello I am looking for some expert help for applying QoS across our Cisco network. BackgroundPort use teams - Voice port 50000:50019 (mark DSCP 46), video ports 50020:50039 (mark DSCP 34), and sharing ports 50040:50059 (mark DSCP 24).Teams marks port...

Hi, I'm running into an issue where 2 of my APs seemed to have gone into FRA. I had enabled FRA just to change the DCA interval. Now I have turned FRA back off. However 2 of my APs seem to have got stuck in that FRA mode. I dont see their 2.4GHz radi...

Hi Wireless Experts! We are running an outdoor wireless mesh around 300-400 Mesh APs and see high channel utilization on some channels. My ask:1. How can I determine what factors are causing high channel utilization?2. How can I leverage Prime to fin...

We have remote sites that have a mixture of Windows 10 clients, Android tablets, and some other hand held scan devices. These devices operate on a WLAN configured for Flexconnect, and are in a Flexconnect Group.  We notice 3 to 4 packet loss during a...

Have this controller and and AP.  Controller is connected to Core C940R on Vlan2 for Management and also VLAN 6 on two separate uplinks..   AP is connected to WS-C3850-48U Access Switch that is Trunked to Core.  AP is connected to switch via Access P...

Hi, Community Member     Test environment:     Third-party vendor has a Radius cloud server, Company has a Cisco WLC 3504 is authenticated and authorized through by public Radius Server. 1/Create user on the server.2/Config AAA on the wlc and WAN pro...

I have Wireless network with AIR-AP1832 APs and CT-3504 controller (OS Ver.: 8.10.130.0). All is working fine except iPhone 11 Pro with iOS 14.3, which disconnects from network frequently. Can anyone help in this regard? WLC Config is attached

Hi AP3702 joined to wlc 2500. Both AP and wlc are in good status. and I cannot see any error message on ap side. wlc also can see the ap joined. Why its light of the ap keeps flashing? Thank you

I have cisco 2800 mobility express, authentication works fine with the radius server but when I disable tls 1.0 and 1.2 in radius authentication not working, is there any limitation that radius authentication happens only in tls 1.0 or 1.2 ?

Hi, Does anybody know of any quick checks in the settings / troubleshooting i can perform before logging a case with Cisco. All WiFi is working as designed across WLAN' (Fountain2 Fountain2 Guest & Fountain2-COPE). My issue lies with Macbooks attempt...

Hi All,  I've been trying to install new license on the WLC, the .lic file is getting uploaded in the flash memory of the WLC but the license isn't getting installed. My WLC is 2504.  Your help will be appreciated.