Good day,My Catalyst 9120 with embedded ewc is behaving strangely after a software update using the http desktop option.I tried updating my device to version 17.15.02, however after everything completed, i lost all communication with the device. coul...
Greetings, I am looking for some guidance regarding peer to peer isolation using multiple aps with local switching.I am using a EWC with four APs and am looking to implement some form of peer isolation. I understand that it will work as is for device...
web auth pending in cisco wlc 9800
Hello,I need to configure a switch to use two different models of APs wifi who connect to two different WLCs (because compatibility).I already have one model of AP who use the option 43 in switch DHCP pool to go the WLC.Now I need to use another mode...
Recently swapped our 3802i APs for all C9130AXI to get the WiFi 6 capability. Have noticed very poor performance overall. Only change has been with the APs, nothing else. The controller remained to be an AIR 3504 and the switch is a Catalyst 3850 UPo...
We have catalyst 9800 WLC and we have 9120 series ap`s which has already aironet firmware, when connected with new WLC after dicovering the controller when it sent the join request we are receiving CAPWAP State: DTLS Teardown message, following is t...
I am trying to implement the following topology with real devices: My devices are:WLC (5520 Series)Access Points (2600 Series) - LightweightSwitch (Catalyst 3750 X Series)I have ran the following configuration on the switch: interface g1/0/1switchpor...
Hello all,I'm setting up a new Catalyst 9115AXI-B with an embedded wireless controller C9800 and am having some trouble getting my wireless clients to get any DHCP information from my external DHCP server. The server is a Windows Server 2019 domain c...
Good day all,I am having trouble setting a static IP for the on board access point with the EWC software using the web UI. The software version of ewc is 17.6.4.Initially i set a dhcp pool in ewc and the access point picked up an address. I then set ...
Can you answer the questions below? 1. Whether or not Oracle JDK is used in the wireless controller(WLC9800) 2. What wireless controller (WLC9800) web page development language is being used? (asp, php, jsp, etc.)
Hello!When attempting to change the DHCP server address for the Management VLAN on the WLAN controller, an issue or error occurs and the DHCP server address doesn't get saved. What should i do?
Hi Guys,Could you plese advise me on how i can take backup of configuration from my WLC. I got ftp or tftp server but when i try to go under commands and upload file its not working.. please help..
The email sent to the guest with the credentials does not contain username. I set the email address to be used as username, but the email does not contain it. What could be the reason for this? Thanks in advance Mike
Similar to the C9800 WLC v17.9.5 CLI Command "show wireless client mac-address 0214.3685.45ef mobility history events" as an example (see attached) I would like to obtain the output for all clients instead of individually.What would be the equivalent...
