Hi Everyone,We have upgraded our core network to Arista and it uses LLDP. I would like to enable LLDP on the 2 sets of 9800 wlcs. Any problems with doing that?thanks for any advice!Sandra
Hi All,
We are due to migrate WLC2504 along with APs to new 9800WLC setup.
Based on the backup file preshared key configured is in this format.
config wlan security wpa akm psk set-key hex encrypt 1 b86d3329e44d59d45b3702def381431e 379eb848c2e12fa...
This is more of a public service announcement about 9130AXIs on 17.12.3. I have a TAC case open on this but it appears that https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwh49406 is a symptom of some other bug involving cleanair on 2.4GHz with 9130...
Creating a BYOD policy using ISE and a WLC. I have everything working except i'm missing something with the FlexConnect ACL defined.In the attached example, the goal is to allow communication to the ISE servers (172.30.10.81/80) as well as DHCP/DNS ...
Hi all, new here, am deploying a wireless network using the Cisco WLC series 9800 and APs, APs have successfully joined the controller but the SSIDs i created are not been broadcasted from the APs. Have anyone face this challenge before kindly advise...
I am trying to get dACL's work in a new WLC 9800 deployment. I have found the following statement but I am not sure what it actually means..Downloadable Access Control List (DACL) will fail if you use a named authorization network method list that i...
Hi all,How can I find out the certificate expiration date of an AP 3702? I have seen the 'show crypto pki certificates' command in various forums but in the case of my AP it does not recognize that command.Thank you very much
Hey all-TL:DR is mobility group between foreign WLC (AirOS) and anchor WLC (9800) appears to have CONTROL path UP and DATA path down.Foreign: 5520 on 8.10.185.0 and 8540 on 8.8.125.0Anchor: 9800 on 17.9.4aBackground: Our enviroment has 10+ foreign WL...
I hat two crashes in my LAB with 17.9.4a an a HA-cluster.
Crash situations:
1) After setting up AVC for policy profiles (Configuration > Service > Application Visibility)
2) Without config change on WLC. Only a new client connected to WiFi (used one ...
Hello everyone,I have rather specific question about syslog on 9130 aps. I would like to activate syslog on the access points. We have a Redhat Rsyslog, and my colleague mentioned he's having some difficulties, if the syslog string doesn't include th...
Hi all,As vMotion is officially supported on the C9800-CL as from release 17.9.2, we have tested it on a few HA deployments and it works well, however Cisco docos state: "Do not run vMotion on both the active and standby VMs at the same time. In the ...
Activity: Creation of a lobby account for the lobby admin.Action Taken: We already created the lobby account; however, upon testing and trying to access it via that created account, we were directed to the error page, and upon searching online for a ...
