Good afternoon r/Cisco,
I am in charge of the VPN for the company I work for and we want to improve our security.
We are using two-factor to authenticate our user, but we wish to also have a way to make sure endpoints are safe once connected to our...
Hi expert out there,
Anyone have experience to power AP2802i with Normal Cisco PoE switch and without external POE injector?
I am a bit confuse with the datasheet powering option. Is that must be UPOE switch or normal PoE switch with sufficient pow...
Hi guys,
A client of ours has 2 x AIR-CT5508-K9. Both are running 8.0.120.0 (can't upgrade the software as they have some outdated AP's). Both controllers are connected to 2 6509's running in VSS.Both controllers have licensing for 250AP's
Anyway...
Good Day,
Occasionally I will receive reports from a location that the Wireless stops authenticating and that users can no longer connect new devices to any of the SSIDs. (Existing connected clients tend to get disconnected as well but not all of t...
Hi I am looking for a standalone Outdoor Access points, which can hold 45+ Degree weather, and make sure that it is doesn't need WLC.Appreciate your advice.
Hello All,
Request your quick help to slove the issue. I am unable to download the webauth certificate to wlc firmware version 8.3.143.0
error logs :
>*TransferTask: Sep 03 17:14:00.191: Memory overcommit policy changed from 0 to 1
*TransferTask: S...
Hi All, what is the maximum Number of Access Points on a Map in PI 3.4? Is there a hard limit, or Best Practice? I have to put between 200 - 300 APs in one Map, one Building with 20 Floors. The PI is working with MSE and CMX.
TiA, BR, Michael
Hi,
I have 5 Cisco 1852 mobility express access points and have all been working fine. But in the last week 4 of the access points keep flapping between standalone and connected mode. I've tried rebooting the access points which join the controller b...
On troubleshooting we found that on core switch ARP will happen for all APs connected in LAN. I am getting ARP of all other APs but except one AP which has issue. Interface VLAN of all AP is configured on core & AP is connected to access switch on a...
Hello Experts,
I have a requirement to completely replace Aruba outdoor deployment (around 190 APs) with Cisco (around 220 APs). However in order to facilitate this, the client has a requirement to facilitate smooth migration.
It is a possible opt...
Hardware used: Cisco WLC 5508Cisco LWAP AIR-CAP3502I-K-K9Windows Laptop This is what the topology looks like. This is a complicated scenario involving ISE with the wireless services. The client can connect with the SSID, but no meaningful traffic i...
I recently installed an 8 AP (1832i) fabric connected to some 2960s. This install is one where I need to run 2 VLANs. Guest and Private. The Private VLAN 10 has a server on it which also acts as the DHCP server for the LANOn the Guest network, VLAN 2...
Hi,
Can anyone tell me if it's possible to move maps between buildings in PI 3.4? I was convinced this was an available option but cannot seem to find it.
Cheers
Neil
