Hello,About 1 year ago, to expand WiFi coverage, we purchased AP Catalyst C9115AXI-E. As the version of the WLC 5520, in SSO and CAPWAP, did not support the new APs, because of the AIR-CAP1602I-E-K9 series AP, it was decided to make use of the EWC th...
Forum Posts
Hi,I have a Cisco AIR 1131 access point(firmware is c1130-rcvk9w8-tar.124-10b.JA3), and when I try to save any configuration, an error message appears: "NVRAM Verification Failed". Please help me fix this error. Thanks in advance.
WLC 3504:8.10.151.0AP C9130AXE-H, External antenna for AXE(enable port A+B): AIR-CAB002-D8-R= + 2*AIR-ANT2524DW-R And AP C9130AXI-H(Enable All ports) From the client side, RSSI is very strong(-20dBm), but the data packets send from Cisco AP is very ...
Hi Guys, I need a help regarding WGB. Before it was connected in WLC8540 (8.5.131.0) with root AP2802. Recently i swapped root AP to catalyst AP9120, also migrated to new WLC8540(8.10.183). But WGB failed to connect to SSID PSK based. Though PSK is ...
Hello Cisco WLAN experts, we are suffering obviously from a CDP/PoE-mismatch problem between Cisco WLAN 3800 APsand small Cisco SG350-office-switches. The result ist that the WLAN AP is drawing 15,4 Watt onlyand all antennas are no longer working. Th...
We have an HA failover pair of 8540 WLC controllers. The primary unit in the pair has thrown an error (though it is still functional) and cisco has sent us a replacement unit. I have been unable to find any official procedural documentation for rep...
Hi, During ssh session i see the following messages: >FP0.16:Punting TCP traffic to CP with IPv4 payload type!!!FP0.03:Punting TCP traffic to CP with IPv4 payload type!!!FP0.05:Punting TCP traffic to CP with IPv4 payload type!!!FP0.11:Punting TCP t...
Resolved! EWC (C9120) questions
Dear community I am somewhere, that internet access is limited and I try to setup a small WiFi for a hospital. I wanted to use a C9120 as EWC + AP and some Aironet 1832 as APs.I converted the C9120 to EWC 17.3.6 but as soon as the EWC boots up, the L...
TeamI have a CMX 10.6.3 that does not authenticate to our Cisco ISE using Radius we think it has something to do with the certificate we are using. Is there a specific certificate we are supposed to use for our CMX to authenticate to our ISE 3.2?
Hello,We're running a network full of C9136 APs on 9800s running 17.9.3 with a open and unsecured guest network on 5GHz.I want to use OWE transition and client steering to get 6E-capable clients onto a OWE/6GHz WLAN.I've setup the OWE transition acco...
Resolved! Client not getting DHCP IP on WLC9800
Hello Professionals,Client can't get DHCP IP from DHCP server through the WLC9800, and here is my network. - When Client connects to SSID:SVI-60, able to get DHCP IP from Core switch. : works! - When Client connects to SSID:SVR-100, Not get DHCP IP f...
Hi all, I'm implementing a Web Auth for a guest SSID. I use local guest user for authentication. Iphone devices are logged in successfully. However, some Android devices and some Windows laptop cannot log in. It says Authentication failed.Could you p...
https://cway.cisco.com/tools/WirelessDebugAnalyzer/ Wireless Debug Analyzer now supports Cat 9800 debugs (RA traces, always-on logs) Wireless Debug Analyzer: This tool parses debug log files for AireOS (WLC 5500/2500/8500/7500/WISM1-2/v...
Hi ThereI got a WLAN Controll 9800 hosted in Azure. At the on premise locations got different VLANs. For example: 900 for smartphones. so they are autheticated by PSK and it works fine. I got another office vlan 800 with 802.x1 -> Radius authenticati...
Dear Experts, I really appreciate kind of beginner level guide (step by step if possible) to understand how to join 9102 to 1832 cluster. 1) I came to know that 9102 cannot join 1832 but 1832 can so we need to make 9102 master and then join all the 1...
