cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
126
Views
0
Helpful
1
Replies

Cisco C9120AXE-K model support autonomous mode?

Need to know, does this model C9120AXE-K support autonomous mode? For branches that need to be standalone unit, with no need to connect to WLC or flex connect configuration.

When I convert this C9120AXE-K to ECW, it stop all process and revert back to capwap mode, when connect to cisco switches local network.

1 Reply 1

jagan.chowdam
Spotlight
Spotlight

There is no autonomous mode for these APs. EWC is the correct configuration method.

Ensure there are no wireless controllers reachable within the network from the EWC AP (Local Subnet, DHCP Option 43, DNS). During the boot process, if the AP discovers a controller in the network, it will join the controller and will not proceed with the EWC controller script.

Follow the link below and make sure to review the pre-requisites.

https://www.cisco.com/c/en/us/products/collateral/wireless/embedded-wireless-controller-catalyst-access-points/white-paper-c11-743398.html

 

Also, share the complete boot log for this AP to analyze the issue.

Jagan Chowdam

/**Pls rate useful responses**/

 

Review Cisco Networking for a $25 gift card