Re: Download show tech-support in WLC

samudro94 · ‎10-06-2022

Hai All,

I would like download of show tech-support, how the command ?

Thank you,

Regards

Kasun Bandara · ‎10-06-2022

try this

https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/cmd-ref/b-cr85/show_commands_r_to_z.html#wp4118605480

Please rate this and mark as solution/answer, if this resolved your issue
Good luck
KB

samudro94 · ‎10-06-2022

How about export the text ?

Rich R · ‎10-08-2022

- Log the output from your terminal session to file
- If you ssh from a linux type server then "ssh <hostname> | tee myfilename.txt" will log all the ssh sesion to the specified file.

------------------------------
Please click Helpful if this post helped you and Select as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.190.0, latest 9800 releases, 8.5.182.11 (8.5 mainline) and 8.5.182.108 (8.5 IRCM)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs