cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
118
Views
1
Helpful
2
Replies

Regulatory Domain for IW9167Access Point

omkar.bengrut
Beginner
Beginner

Hi ,

The Cisco Catalyst IW9167 AP was introduced in June 2023; however, I have not been able to find it listed on the regulatory domain list. I have been searching on the following link, but with no success:

Link: https://www.cisco.com/c/dam/assets/prod/wireless/wireless-compliance-tool/index.html.

Is there another link where I can find information on AP regulatory domains?

1 Accepted Solution

Accepted Solutions

Rich R
VIP
VIP

It looks like they've forgotten to add it.  Contact TAC and ask them to follow up.
It looks like it's using many of the older (pre-ROW) domains as well as some ROW.
You may find some of the info in https://cae-cnc-prd.cisco.com/pdtcnc/#/

------------------------------
TAC recommended codes for AireOS WLC's   and   TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's   and   Best Practices for 9800 WLC's
Cisco Wireless compatibility matrix
Field Notice: FN-63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN-72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN-72524 - During Software Upgrade/Downgrade IOS APs Might Remain in Downloading State
     after 4 Dec 2022 Due to Certificate Expiration - Fixed in 8.10.185.3 and latest 9800 IOS-XE releases
     also fixed in 8.5.182.11 (8.5 mainline) and 8.5.182.108 (8.5 IRCM) if you can't upgrade to 8.10
     TAC confirmed that Mobility Express AP TFTP download is not affected so ME 8.5.182.0 still works but see FN-74035 below
Field Notice: FN-70479 Out-Of-The-Box AP Fails to Join WLC or Joins with Single Radio due to Country Mismatch - RMA required
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN-74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
     fixed in 8.10.185.3 and see the field notice for 8.5, Mobility Express and other fixed releases
Check your WLC config with Wireless Config Analyzer using "show tech wireless" output (9800) or "config paging disable" then "show run-config" output (AireOS) and use Wireless Debug Analyzer to analyze your WLC client debugs
Leo Laohoo's list of bugs affecting 2800/3800/4800/1560 APs

View solution in original post

2 Replies 2

marce1000
VIP
VIP

 

 - Needs to be specified when ordering ; ref : https://www.cisco.com/c/en/us/products/collateral/wireless/catalyst-iw9167-series/cat-iw9167e-heavy-duty-ap-ds.html
                           Look for Frequency band and 20-MHz operating channels

 M.



-- ' 'Good body every evening' ' this sentence was once spotted on a logo at the entrance of a Weight Watchers Club !

Rich R
VIP
VIP

It looks like they've forgotten to add it.  Contact TAC and ask them to follow up.
It looks like it's using many of the older (pre-ROW) domains as well as some ROW.
You may find some of the info in https://cae-cnc-prd.cisco.com/pdtcnc/#/

------------------------------
TAC recommended codes for AireOS WLC's   and   TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's   and   Best Practices for 9800 WLC's
Cisco Wireless compatibility matrix
Field Notice: FN-63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN-72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN-72524 - During Software Upgrade/Downgrade IOS APs Might Remain in Downloading State
     after 4 Dec 2022 Due to Certificate Expiration - Fixed in 8.10.185.3 and latest 9800 IOS-XE releases
     also fixed in 8.5.182.11 (8.5 mainline) and 8.5.182.108 (8.5 IRCM) if you can't upgrade to 8.10
     TAC confirmed that Mobility Express AP TFTP download is not affected so ME 8.5.182.0 still works but see FN-74035 below
Field Notice: FN-70479 Out-Of-The-Box AP Fails to Join WLC or Joins with Single Radio due to Country Mismatch - RMA required
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN-74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
     fixed in 8.10.185.3 and see the field notice for 8.5, Mobility Express and other fixed releases
Check your WLC config with Wireless Config Analyzer using "show tech wireless" output (9800) or "config paging disable" then "show run-config" output (AireOS) and use Wireless Debug Analyzer to analyze your WLC client debugs
Leo Laohoo's list of bugs affecting 2800/3800/4800/1560 APs
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: