About Shuhaib Thottathil

Shuhaib Thottathil · 11-25-2020

Hi Vishal, If you have access to the FTD console then you can configure as shown below from the clish mode (>) configure network ipv4 manual 1.1.1.1 255.255.255.0 1.1.1.2 But before I do that I would like to understand how I lost access to the ...

Shuhaib Thottathil · 11-25-2020

Hi Luigi, If you have already identified a flow which is not hitting the correct rule lets make use of the tools available with in the FTD to identify the reason behind it. login to the FTD and then run "system support trace" from the clish mode ...

Shuhaib Thottathil · 11-25-2020

Hi Robby, we need to understand the error behind it. We have something called pigtail available in firepower devices. Connect the FMC via CLI. Be a root user and then run the command "pigtail" try to login to the FMC GUI and complete the steps y...

Shuhaib Thottathil · 11-25-2020

Hi Mohamed, If you are planning to do a reimage of the firepower module installed in the ASA you do not like to have any failover incident during the reimage process it's better to stop the monitoring of the service module. Since both of them are...

Shuhaib Thottathil · 11-25-2020

Hi When an upgrade is started we create a directory with the upgrade version name and all the logs related to upgrade will be stored under that folder. Once you are inside the FTD shell switch to directory /ngfw/var/log/sf/<upgrade version> in...

Member Since	‎01-19-2017 11:06 PM
Date Last Visited	‎11-29-2020 07:42 AM
Posts	6
Total Helpful Votes Received	26

User Statistics

User Activity

Re: unable to access ftd device via management interface

Re: Issues with URL Filtering in FMC

Re: Firepower Management Center Virtual Appliance 6.2.3 - Web GUI - Internal Error 500 after successful login

Re: Firepower module Re-image (ASA5545)

Re: Checking FTD Firmware Upgrade Status Checking via Cli