About eAgencyInc

eAgencyInc · 05-04-2017

Cisco ASA 5510 running Version 8.0(5) Two routers on separate ports. One works as it should, the other is being finicky for a completely unknown reason. ping PORT1 8.8.8.8 Sending 5, 100-byte ICMP Echos to 8.8.8.8, timeout is 2 seconds: !!!!! Succes...

eAgencyInc · 05-17-2017

Hi AJ, Once again thank you for the time you spent trying to help me. It doesn't happen often and it's way cool to see it actually happen! Anyway, I had the vendor replace their router. However, not much has changed. I still get 3/5 when pinging Goog...

eAgencyInc · 05-15-2017

Thank you very much for the time you spent helping me thus far, AJ. It is greatly appreciated and hardly seen out there. Before we proceed trying to troubleshoot my own ASA, I'm having the router we connect to replaced by the vendor because it died c...

eAgencyInc · 05-12-2017

Like I showed above, I added the route as you suggested. However, it made no difference. Still the inconsistent pinging happens and no capture results.

eAgencyInc · 05-12-2017

I added the route as you suggested. Just for troubleshooting, really, since the routes are set to be automatically entered based on track sla. route ISP1 0.0.0.0 0.0.0.0 1.2.3.4 2 track 2route ISP2 0.0.0.0 0.0.0.0 2.3.4.5 3 track 3route ISP1 0.0.0.0 ...

eAgencyInc · 05-05-2017

I posted the "show int" output after you replied this this thread. Should be seen above. As far as capo2, it does capture stuff there and shows it just fine. Here is the "show route", slightly modified for privacy. # show routeGateway of last resort ...

Member Since	‎04-11-2017 09:34 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	9

User Statistics

User Activity

ASA 5510 interface issue

Hi AJ,

Thank you very much for the

Like I showed above, I added

I added the route as you

I posted the "show int"