Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Last week meraki updated the firmware on our MS225 switches, since then our MS42 wireless AP radius SSID is not working at all of our 4 sites. I enabled WPA2 wireless which works and guest works, I can test the radius SSID and it passes. but when con...
So turned out was never an issue with the switch firmware updates, it was the NPS certificate expired, coincidentally expired the same day meraki did the firmware updates so they got the blame. Weird that testing the radius server still passed with t...
Tried the manual connection and I was able to connect, thanks for the tip. It will be a pain to do this for all the users though, but I have something I can go back to the meraki tech with working my case.
Network access is set to My Radius ServerWPA encryption mode set to WPA2 only802.11r and 802.11w disabledno splash pageDefaults for all the timeouts and retriesRADIUS testing - disabledRADIUS CoA support - disabledRADIUS attribute specifying group po...
