Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Background infoI have a block of 5 public IPs 50.xxx.xxx.249-253Outside interface of the ASA is set to 50.xxx.xxx.249Public IP of webserver is 50.xxx.xxx.251Internal IP of web server is 10.200.58.6Ports needed for web server 80, 443I have attempted s...
Jon, thanks again for the assistance. Since it is currently working and I am remote from the device I think I will wait until my next site visit to make that change. At least that way if it should blow up I will be able to have physical access. :>)I ...
Jon, here is the config: Saved:ASA Version 9.0(4) !hostname ciscoasaenable password xxxxxxxxxxxx encryptednamesip local pool VPNPool 10.200.59.10-10.200.59.35 mask 255.255.255.0!interface Ethernet0/0switchport access vlan 2!interface Ethernet0/1!inte...
I am currently connected to the VPN and RDP'd to a server and I do have internet access through that server, so that is all good. Thanks so much for assisting me with this config, you really did me a huge service by getting it properly configured. Th...
Jon, I corrected the external IP from 241 to 251, a couple of the commands threw errors, see below.Result of the command: "no nat (inside,outside) source static InfoExchange_Internal InfoExchange_Ext service http http"The command has been sent to the...
