Hello campbech1,
The firewall by itself doesn't inspect encrypted traffic nor the IPS. You may want to look into another solution like firepower to control those applications.
Regards,
Jose Orozco.
Hello rodexitsupport123,
Can you post the configuration also what code is your device running?
When you are talking about PAT I assume that you are doing a port forwarding? If that is the case the static NAT is going to be for the destination when ...
Hello John,
This document has instructions on how to create rules for blocking P2P on the ASA. However those applications normally relay on encrypted mechanisms and port randomizers that make it more difficult to catch users and also have on mind tha...
Hello Devlin,That waiting status most likely is caused by a lack of communication between that interface and the same one on the peer. You can test that with a ping from one device to the other if you have the standby ip setup on the interface. If th...
Hello J,If you need to receive traffic on both ISP's that will work meanwhile you have static translation. The inactive unit will receive the traffic and pass it to server and the same flow will be used to send the traffic out to the same path. That ...