Try reimporting the sensor. This will read the meta files for the sensor and place it in the MC database. If the meta data is not in the sensor database, then you'll see this error.Hope this helps.
Here are some things to check that cause signature updates to fail.1. Did the ip address of the IDSMC change since install?The IDSMC has to tell the sensor where the update package lives.Here's what to do when the IP address changes:Stop daemon manag...
You could use the "copy" command and copy one of the sensors configs off to a secure (scp) or ftp server:http://www.cisco.com/univercd/cc/td/doc/product/iaabu/csids/csids10/cmdref/15599ch2.htm#377910Then use it again to bring the config in .....It co...