Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an ASS5510 with 3 interfaces, External, Internal, and DMZ. I have configured a mail server in the DMZ and I can get to it from the external interface and from the internal interface.External access is a simple NAT..static (outside,dmz) 192.16...
I have dis, and re connected. Same behavior so far. I m using the FQDN to access the mail server, and it is resolving to 192.168.200.25.I have been pawing through the access lists, here is what I have trimmed down to...access-list outside_access_in...
Crypto map wise, I have what was there before me. the 99 is for split tunnel.Should I add those lines? FYI, I am NOT at the site, so if there is a possibility of breaking what is running there now, I don;t want to do that.
I usually do pull external IP's, but I spaced it since I'm multi tasking here ATM.Here is the crypto output...crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHAcrypto dyn...
