About kozinyy

kozinyy · 04-27-2005

I updated one of our PIX-515E to the new version 7.0.The box has 128 MB of RAM and has DES enabled.But when I tried to load the new PDM (asdm-501.bin file) I've got the error:Error reading tftp://A.B.C.D/asdm-501.bin (Unspecified Error).Any suggestio...

kozinyy · 08-02-2004

I have a stand-alone CE-590 connected to 72xx ISP router,located outside of our PIX. When WCCP service is enabled, download speed (tested using DSLExtreme site) is about 11MB, but if WCCP is disabled (or simple unplugged cable from CE), then download...

kozinyy · 05-04-2005

Thanks for the reply. I did perform exactly what you described (A.B.C.D - is ip address of my TFTP server). I tried to do from two different computers with the same negative result. Will try to re-install 7.0 and see what would happends

kozinyy · 12-28-2004

When you use a word "host", don't use any mask.

kozinyy · 08-11-2004

Hi Gilles,Thanks for your explanation of loopback interface.I placed the captured files here: http://www.lavc.edu/CE_Capture.zipThe names are self-explanatory: 11mb-slow connection, 22 mb-fast one , with the test running, and no-test running. If you...

kozinyy · 08-10-2004

Hi to both of you - Joerg and gdufour,Thanks a lot for all your inputs - I now really better understand what is going on…Our path for the traffic is: PC->Internal Proxy->PIX525->CE-> ISP’s Router (WCCP)->Internet.I checked all your suggestions and ...

kozinyy · 08-09-2004

Hi Joerg,Thanks for all your inputs.All ports are configured manually for 100 FullDuplex. The problem is not in DNS services because it was the same behavior with old 4.2.x version which not supports DNS service.But I did capture today (with Fluke Op...

Member Since	‎02-10-2004 09:23 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	12
Total Helpful Votes Received	1

User Statistics

User Activity

ASDM 5.01 and PIX 7.0

CE-590 and Router

Re: ASDM 5.01 and PIX 7.0

Re: Adding an IP ranged acl

Re: CE-590 and Router

Re: CE-590 and Router

Re: CE-590 and Router