Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
In our test environment we have tried activate our Cisco FTD 6.2.2.1, but we have one reoccurring problem, the FTD keeps blocking traffic that goes between hosts on the same inside network. When we check the connection log we see that it hits the "De...
Hello,
I did a packet trace between host A and host B on the inside network, both on the same subnet and security zone. It gave me the following drop reason:
Result:input-interface: insideinput-status: upinput-line-status: upoutput-interface: dmz365o...
Hello,
I totaly agree that the architecture should be fixed and work as inteden instead of resolving to other things. But we have researched the documentation we could find (get a impression that the system is not very good documented yet) and we hav...
Hi,
We did some research on asynchronous routing and we found this document, which explain that we can use TCP State Bypass using FlexConfig to resolve asymmetric routing. Is this a sugested solution to the problem you described or is there another p...
The FTD is blocking traffic sent between internal hosts.Have runned wireshark, does not see any odd traffic (not much at all)Its a flat network so the two gateways have different IP in the same network.FTD is running in routed mode.
It seems that tra...