About vkovac13

vkovac13 · 06-09-2020

Hello. ISP that I work in is using VXR7206 routers for PPPoE aggregation. 7206 are connected to Freeradius for AAA. I'm trying to add ASR1002 with IOS XE 3.16.10S (asr1000rp1-adventerprise - latest) and for 2 days now I can't get it work.Here is my r...

vkovac13 · 06-29-2020

I've tested with mentioned command but still does not work. It accts the same as without this command. For test I've commented lines for rate-limit in my radius conf and it works. Only when sending lcp:interface-config#1rate-limit it does not work.I'...

vkovac13 · 06-26-2020

Hello. I found the problem.. For every customer packet I have defined rate-limit which limits upload and download.That is stored in one of my Views in database which I send to router via Freeradius SQL-wdsl.conf and the line that does that is:authori...

vkovac13 · 06-24-2020

Hello. Yes, this attribute is commented as I did not need it. Could that be the reason for my problems? I want to upgrade to 3.x version so bad but i have 4 more 7206VXR routers with 12 sw version in network and I don't know yet how will they act wit...

vkovac13 · 06-23-2020

Hello. I have Freeradius 2.1.12 in production with SQL. On that Radius ASR is not working well. As I mentioned, in LAB with Freeradius 3.x and SQL (same configuration as in production but new version of Freeradius) I managed to get it work without an...

vkovac13 · 06-19-2020

I've managed to setup lab with freeradius 3.0.17 and I got it to work.After that I've put ASR back into real working environment and investigate futher. In freeradius debug mode I saw that customer is allocated with lets say 192.168.100.125 IP addres...

Member Since	‎04-05-2018 11:51 PM
Date Last Visited	‎06-29-2020 04:26 AM
Posts	8

User Statistics

User Activity

Cisco ASR1002 and Freeradius 2.1.12 problems

Re: Cisco ASR1002 and Freeradius 2.1.12 problems

Re: Cisco ASR1002 and Freeradius 2.1.12 problems

Re: Cisco ASR1002 and Freeradius 2.1.12 problems

Re: Cisco ASR1002 and Freeradius 2.1.12 problems

Re: Cisco ASR1002 and Freeradius 2.1.12 problems