Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hi guysI connected the eth1 interface to a hub and my laptop to the hubThe link led is flashing green on both interfacesI cannot ping the pix515E on 192.168.1.1 and do not have a valid IP adress on my laptop despite PIX being able to give DHCP adress...
ok thanksDo you think that not having pdm access and not beeing able to ping the PIX was due to having a failover Pix? Buying the upgrade licence will solve the problem for 100%?(I do not want to advise my boss to buy a many hundreds euros licence if...
just two more questions before buying upgrade :- our failover version of pix was a 6 ethernet port.If we buy a 515 FO-R version which only support 3 ports, will it work? (no, or only with 3 ports, or with the 6?)Or is it necessary to buy a FO-UR upgr...
I think I have found the problemWhen rebooting the PIX, I saw the following message while connected via console ========================== NOTICE ======================== This machine is licensed as a secondary failover unit but lacks a connec...
