你好,我认为这个可能是存在已知的bug,5520和8540可能都会出现,如下列举两个bug:这都和FAN异响有关系,建议升级到suggested版本。
DN1/DN2: Need closed loop 5520/8540-Cavium fan control
CSCuu86587
Description
Symptom:
Excessively loud fan noise complaints
Conditions:
Worst case thermal condition is observed with low fan speeds while DN Intel CPU is idled or under light loading while the Cavium CPU is under 100% load. Fans adjust to Intel thermal conditions but do not account for Cavium card conditions
Cavium die temperatures increase at higher altitudes, but fan speeds do not track accordingly
Workaround:
Further Problem Description:
-------------------------------------------------------------
Anomalous Fan Speed/Temp reading for 8540
CSCux93468
Description
Symptom:
Customer 8540 on 8.2.100.0, reports high speed noise, even when power profile is low temp
Fanloop stats shows negative max temp, and extremely high avg temp reading
Conditions:
8540 controller
The reading of test command, shows invalid temperature range:
Cisco Controller) >test imm chassis fanloop-stats
Fan Policy : Low power
..
Max Temp read : -1 <---here
Min Temp read : 25
Avg Temp read : 270002 <--- here
..
Poll Durtaion : 3
Workaround:
possibly a reboot
Further Problem Description:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rps-Cheers | If it solves your problem, please mark as answer. Thanks !