本帖最后由 yanzha4 于 2015-1-19 16:03 编辑
AP 加入不到WLC 最常见解决方法：
1.country code 一致
2. 时间配置一致，目的是让证书时间一致，不至于一个过期，一个不过期
3. WLC允许的最大AP连接数数目等。
你可以将 AP MAC 地址 加入WLC 的 MAC Filter
WLC (Security > MAC Filtering > New...
" You must enter the MAC address for all mesh access points that you want to use
in the mesh network into the appropriate controller. A controller only responds to
discovery requests from outdoor radios that appear in its authorization list.
MAC filtering is enabled by default on the controller, so only the MAC addresses
need to be configured. If the access point has an SSC and has been added to the AP Authorization
List, then the MAC address of the AP need not be added to the MAC Filtering List. "
