I would like to proceed with SNMP Context and SNMP Community settings in an environment running multiple VRFs in NXOS 9.3(11).
I understand that in order to deliver information about the OSPF/BGP routing protocol operating per VRF in NXOS to the NMS, an independent SNMP setting must be performed per VRF.
EX)
snmp-server context TEST1 vrf default
snmp-server context TEST2 vrf TEST-VRF-1
snmp-server context TEST3 vrf TEST-VRF-2 => Only one SNMP context can be assigned per VRF, or else would be overwritten
snmp-server community TEST1_comm group network-operator
snmp-server community TEST2_comm group network-operator
snmp-server community TEST3_comm group network-operator => Set SNMP Community String
snmp-server mib community-map TEST1_comm context TEST1
snmp-server mib community-map TEST2_comm context TEST2
snmp-server mib community map TEST3_comm context TEST3 => Mapping SNMP contexts with SNMP community strings
However, in this way, I understood that 10 SNMP Context and SNMP Community settings are required for N9K, where 10 VRFs are used.
Is it possible to configure a single SNMP Context/SNMP Community to forward information about OSPF/BGP routing protocols operating in multiple VRF environments to the NMS?
I would appreciate it if you could check the contents.
Thank you.
