As mentioned in a side comment, a statically configured (IP, GW, two DNS!) but not connected WAN interface - here WAN2 - shows up very different:
1. System Summary - all 0.0.0.0, one DNS, but 0.0.0.0:
WAN Status
| WAN1 | WAN2 | WAN3 | WAN4 | ||||
|---|---|---|---|---|---|---|---|
| IP Address : | 10.10.1.236 | IP Address : | 0.0.0.0 | IP Address : | 0.0.0.0 | IP Address : | 0.0.0.0 |
| Default Gateway : | 10.10.1.254 | Default Gateway : | 0.0.0.0 | Default Gateway : | 0.0.0.0 | Default Gateway : | 0.0.0.0 |
| DNS : | 10.10.1.13 | DNS : | 0.0.0.0 | DNS : | 0.0.0.0 | DNS : | 0.0.0.0 |
| Dynamic DNS : | Disabled | Dynamic DNS : | Disabled | Dynamic DNS : | Disabled | Dynamic DNS : | Disabled |
| |||||||
Very different in Logs -> System Statistics: Here with the configured IP, but mask and GW on 0.0.0.0 - and no DNS:
| Status | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IP Address | 192.168.1.1 | 81.221.22.37 | 10.10.1.236 | 0.0.0.0 | ||||||||
| MAC Address | ||||||||||||
| Subnet Mask | 255.255.255.0 | 0.0.0.0 | 255.255.255.0 | 0.0.0.0 | ||||||||
| Default Gateway | ||||||||||||
| DNS | --- | --- | 10.10.1.13 | 0.0.0.0 | ||||||||
Consitency seems to be an unkonwn design and implementation feature...
