What about this - usability, better information:
System Summary - WAN Status
Instead of the green "Dynamic DNS is updated successfully." -> "[DDNShostname] updated successfully."
WAN Status
| WAN1 | WAN2 | WAN3 | WAN4 | ||||
|---|---|---|---|---|---|---|---|
| IP Address : | 10.10.1.227 | IP Address : | 81.221.22.36 | IP Address : | 0.0.0.0 | IP Address : | 0.0.0.0 |
| Default Gateway : | 10.10.1.254 | Default Gateway : | 81.221.22.33 | Default Gateway : | 0.0.0.0 | Default Gateway : | 0.0.0.0 |
| DNS : | 10.10.1.13 | DNS : | 80.254.161.126 | DNS : | 0.0.0.0 | DNS : | 0.0.0.0 |
| Dynamic DNS : | Dyndns Enabled : Dynamic DNS is updated successfully. | Dynamic DNS : | Dyndns Enabled : Dynamic DNS is updated successfully. | Dynamic DNS : | Disabled | Dynamic DNS : | Disabled |
