em 10-16-2022 07:57 AM
Hello,
I need to advertise 3 blocks /32 on a VPN via BGP, but these block are in a interface subnet /24 on my Cisco ASA.
Example:
CISCO ASA
TunnelXX ( VPN ) - 10.0.0.1/30
GI0/1 - 192.168.0.0/24
In this Cisco ASA i need to announcement 3 productions servers (192.168.0.37, 192.168.0.127 and 192.168.0.133).
I know that i need to add route in RIB to announcement in BGP, but when i put these route to Null0 i can't reachable these servers.
I tested a way, addind the route using the same IP as gateway and works, example:
route GI0/1 192.168.0.37 255.255.255.255 192.168.0.37
But i am not sure if this is the best way to do that and i want to know if there are other possibilities to do that.
Thanks
em 10-16-2022 11:31 AM
try redistribute connect if <<this /32 is anyconnect IP>>
because other solution like config static route /32 to null0 make blackhole and traffic is drop in your ASA.
em 10-17-2022 05:45 AM
Thanks for answer.
I had enabled to redistribute static and connected routes. But still not announcement.
When you say "connect if <<this /32 is anyconnect IP>>", need i to create the route ? Or because if have the entire network (/24) on my interface the CIsco ASA will announcement the IP /32?
Thanks again
em 10-17-2022 05:20 AM
@paulormbsd primeiramente muito obrigada por sua pergunta.
Estamos na Comunidade Cisco em Português. Sinta-se á vontade para seguir com o tópico em português.
Espero que as soluções te ajudem!
Att,
Gabriela
Community Manager
em 10-17-2022 05:45 AM
Obrigado pela informação @Gabriela Godoi do Prado
Descubra e salve suas ideias favoritas. Volte para ver respostas de especialistas, passo a passo, tópicos recentes e muito mais.
Novo por aqui? Comece com estas dicas. Como usar a Comunidade Guia do novo membro
Navegue pelos links rápidos da Comunidade e usufrua de um conteúdo personalizado e em seu idioma nativo: