Hi everybody
I just installed a 191 ATA phone adapter.
I have the following problem :
Every 15 to 30 mn, the device reboots, I have no idea why. And that interrupts all activity. PRT button starts blinking, then all the boot process goes on.
I could get 2 messages from the log which are:
1)
Jun 29 21:28:36 ATA191-MPP local1.debug vsock:
Jun 29 21:28:39 ATA191-MPP local1.warning vsock: fpar2_update_flash() Finish SYS Saved, infoCnt=0 sysCnt=3
Jun 29 21:28:39 ATA191-MPP local1.warning vsock: fpar2_update_flash() PAL-PARM Saved, pid=208, type=2, attr=0x0, name=SIP Reg Call ID State
Jun 29 21:28:40 ATA191-MPP local1.warning vsock: fpar2_update_flash() Finish PAL Saved, palCnt=1 infoCnt=0 sysCnt=3
Jun 29 21:28:40 ATA191-MPP local1.err vsock: reboot_check(341), reboot reason 800000
Jun 29 21:28:41 ATA191-MPP local1.debug vsock: SAFE_MON_main() ccTick:10465->10565, ccCnt=10147->0, monNum=2
Jun 29 21:28:41 ATA191-MPP local1.warning vsock: hal_board_warm_reboot (145, tid=0xc487f460) do system sync
Jun 29 21:28:42 ATA191-MPP local1.warning vsock: hal_board_warm_reboot () fp-size=1048576 date=2024-06-29T21:28:40
Jun 29 21:28:42 ATA191-MPP local1.warning vsock: hal_board_warm_reboot (163, tid=0xc487f460) terminate VoIP service
Jun 29 21:28:42 ATA191-MPP user.info CSSD[27909]: In rtp_event_stop_notification() id -1, QType ffff
Then 2)
Jun 29 21:29:12 ATA191-MPP local1.warning vsock: +++++++++++++++++++++++++++++++++++
Jun 29 21:29:12 ATA191-MPP local1.warning vsock: System started: ip@192.168.0.10, reboot reason:C800000
Jun 29 21:29:12 ATA191-MPP local1.warning vsock: +++++++++++++++++++++++++++++++++++
Jun 29 21:29:12 ATA191-MPP local1.warning vsock: fpar2_update_flash() Finish PAL Saved, palCnt=1 infoCnt=0 sysCnt=1
Jun 29 21:29:12 ATA191-MPP user.info CSSD[28611]: [\'dua_send_cbk\':\'409\'] layer \'2\' even \'11\' *************************
Jun 29 21:29:12 ATA191-MPP user.info CSSD[28611]: [\'dua_send_cbk\':\'409\'] layer \'2\' even \'11\' *************************
Jun 29 21:29:12 ATA191-MPP local1.debug vsock: TP_openUdpSocket2(720) lid=0, isIpv6=0
Jun 29 21:29:13 ATA191-MPP local1.debug vsock: TP_openUdpSocket2(720) lid=1, isIpv6=0
Jun 29 21:29:13 ATA191-MPP local1.debug vsock: SIP_tpInit(1577) gSipSkt[0]=20, gSipSkt[1]=21, gSipSktPrefer[0]=20, gSipSktPrefer[1]=21
Jun 29 21:29:13 ATA191-MPP local1.debug vsock: SIP_allocRegObj(1299)111
Jun 29 21:29:13 ATA191-MPP local1.debug vsock: SIP_allocRegObj(1299)111
Jun 29 21:29:14 ATA191-MPP local1.warning vsock: fpar2_update_flash() Finish SYS Saved, infoCnt=0 sysCnt=1
Jun 29 21:29:15 ATA191-MPP local1.debug vsock: SAFE_MON_main() ccTick:0->64, ccCnt=0->0, monNum=0
Jun 29 21:29:18 ATA191-MPP local1.debug vsock: SIP_getIpBySrvHost2(83) line(0) Resolving(sip.ovh.fr) port(5060), rc=5
Jun 29 21:29:18 ATA191-MPP local1.debug vsock: SIP_getIpBySrvHost2(122) line(0), type=0
Jun 29 21:29:18 ATA191-MPP local1.debug vsock: SYS_resolveLocalARecord(), 444, name = sip.ovh.fr
Before this device I had a PAP2 one which has worked fine for years, on the same lines.
If anyone has an idea of what causes this device to reboot ?
Yhx
