Change of Authorization (CoA) is a feature that allows a RADIUS server to control a device’s network access policy after authentication. RADIUS servers can send CoA messages to reauthenticate and reauthorize a device. CoA can trigger a change of the group policy, VLAN, firewall ACL, traffic shaping, bandwidth limits, and more. CoA enables continuous control over devices’ network access and allows the policy to be automated by the RADIUS server. Meraki’s CoA is supported by several RADIUS vendors including Cisco, Bradford, ForeScout, PacketFence, and Impulse Point.
Customers with Cisco ISE workflows with Meraki MR access points can now use all ISE features including Device Posturing and Central Web Authentication (CWA). Meraki access points will automatically redirect users' web browsers to the Cisco ISE server's splash page. By sending Change of Authorization (CoA) messages to the Meraki network, Cisco ISE can now control a user's firewall ACL, traffic shaping, bandwidth limits, and VLAN assignment.
To enable these features, please contact Meraki support (email@example.com) or your systems engineer and request the CoA / Cisco ISE integration feature to be enabled.
For more on CoA with RADIUS, please read the article on .
Hi,Like to know is there an API for Meraki that allows me to pull the Power Source of an access point? Currently in the GUI dashboard, there is a "Power" field that say "AC adapter" or "POE 802.3au". Is there an equivalent for that in the API?
In DNA Spaces REST API, there is a GET operation, inside which there are some parameters for which I am searching for interpretation.
Please if you can provide some help about the them it would be highly appreciated.
For GET history/clie...
I am looking to make calls to the Location API on our CMX v7 server. The CMX administrator set up a user and assigned them to the "Admin" Group, and I can call the APIs as expected. But when I create a new user with the same "Admin" Group, the...
Hi allI'm trying to add Tags through netconf to an Access Point on a WLC98k (17.3.1).Here is the code:from ncclient import manager
insert_ap_cfg_data = '''