About samd

samd · 08-23-2018

Hi, Looking for help on how to Set Fault Suppression on a Service Profile in UCS with Start Time and Duration.I can add one using Add-UcsFaultSupression cmdlet but unsure of how to set Start Time and duration.Any help will be greatly appreciated. ...

samd · 09-03-2018

Thanks rrawal, that worked like a charm.

samd · 07-09-2018

Thanks Rishi,That works for our C24 M3 but not for C220 M4, both are running 3.0(4d).On the C220 M4 it tries to boot off On Board NICs instead of the VIC eth0. Below is what I'm trying.Get-ImcLsbootDevPrecision | Add-ImcLsbootPxe -Name "VICPXE" -Orde...

samd · 07-03-2018

Hi Gregory,Is it possible to set onetime boot device using Cisco-IMC module?I've added PXE Boot device as below and would like to add that as one time boot deviceGet-ImcLsbootDevPrecision | Add-ImcLsbootPxe -Name "VICPXE" -Order 1 -State "Enabled" -S...

Member Since	‎12-14-2016 08:58 PM
Date Last Visited	‎09-05-2018 12:26 AM
Posts	4

User Statistics

User Activity

Fault Suppression using Cisco Power Tool - With Start Time and Duration

Re: Fault Suppression using Cisco Power Tool - With Start Time and Duration

Re: Change boot order in BIOS for C-Server

Re: Change boot order in BIOS for C-Server