Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
All, I am having difficulty setting up an OpenVPN firewall rules. Here is my running config : Saved:: Serial Number: JAD21290D2D: Hardware: ASA5506, 4096 MB RAM, CPU Atom C2000 series 1250 MHz, 1 CPU (4 cores):ASA Version 9.8(1)!hostname ciscoasaenab...
I am having issues with a port forward for an ASA 5506-x. All of the packet traces run fine, but with I attempt a connection the firewall logs show the following error.
3 Sep 03 2018 00:59:12 174.230.134.101 9631 <<outside IP>> ...
All,
I need some help from the cisco guru's again. I have as ASA firewall setup with a static IP address. That is working almost flawlessly. Except for the domain of all people my employer. Any help on resolving this issue is appreciated. Here is m...
We have an ASA5512 x series Version 3 that we need to setup for multiple incoming IP addresses. Not sure where to start with this. We do need some specific steps to take so please be specific.
For example we have 1 external Ip address 174.98.0.1 (no...
The Result here is the exact same situation. I believe my NAT path is incorrect as it does not include the external IP address. When I create the path and add to to tine Out-In portion (translated IP address) I get the error that it overlaps with the...
Seems I may have found my problem, but don't know how to fix it. When I put the translated address as my external IP address I get the error message that is overlaps with external IP address. So I have to setup port forwarding. All of the instruction...
Ok, I found one problem. The outside interface was set as DHCP. I got the static setup. All of the packet traces are running successfully. But I am still getting the denied by ACL error.
