Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,We use multiple ASA 5500/5580 cluster systems running 8.3 software versions Actually we send all our FW syslog data to a SIEM appliance in a DMZ on a remote firewall (non-asa).Recently we suffered a strange incident while implementing a new SI...
Hi,I've implemented signature update S492, but apparently there is a problem with the new signature 5577.1 : SMB Secure NULL Login Attempt . During the upgrade process run from our CSM V3.3.1, the deployment manager returns an error :instance=sig0:un...
Hi All,I have an ASA5580-20 with 2 port of 10Gig. I have configured the A/S failover usiasang suinterface in "interface TenGigabitEthernet7/1" interface. it work fine. but the problem I have is I can't assign any subinterface to any context. is that ...
hi all,is it possible to migrate and share Objects from one security context to an other one?I can do it manualy via CLI, but if I change an oblect in one context, the same object in the other context is wont be modified. any idea, or it's not possib...
Hello,Take a look here, maybe you know it:management-accesshttp://www.cisco.com/en/US/docs/security/asa/asa72/command/reference/m_72.html#wp1794331What is the feedback?Best regards
No, we don't have such custom signature. Moreover I think custom signatures start from 60000 ; so I suppose there should be something wrong with this new subsig. I'll open up then as you advise a support call.
Thank you for your answer.In the ASA5580-20 I have: - 2 * 10Gig LC - 2 * 1gig Mgmt port.So how can I configure FO without using one of these interafces? what are your recommendations?Best Regards
I find the answer: http://www.cisco.com/en/US/docs/security/asa/asa81/config/guide/failover.html#wp1061397============================================Step 5 (Optional) To enable Stateful Failover, configure the Stateful Failover link. a. Specify the ...
