Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We need to deploy a Cisco ASA 5510 behind the Internet facing router for Remote Access VPN (RAVPN). We bought the block of 16 IPs (in a different subnet) which is routed through the main router (69.x.x.x)and configured the outside interface of ASA wi...
Thank you all for your support.I talked to the ISP provider and found out that the IPs (blockof 16) that we bought are not true static IPs. They're routed through the main router - 69.x.x.x. So, we can't use as public IP for the outside interface of ...
hello John and Julio,Thanks for helping me out!As I mentioned in the 1st post, we bought a block of 16 IPs (in a different subnet - 64.x.x.x) which is routed through the main router (69.x.x.x). So, not sure how to config the ASA outside interface.Reg...
The default route for the ASA is the 69.x.x.x - the public IP of the RV082 gateway router.I did setup a packet capture and it's getting to the outside interface of the ASA. But, from the ASA, I can't ping its default gateway 69.x.x.x.
IP configuration for the outside ASA:Interface: Ethernet 0/0Name: OutsideEnabled: YesSecurity label: 0IP address: 64.26.185.50Subnet mask: 255.255.255.240Yes, the switchport that the ASA is connected belongs to the 69.x.x.x network.