Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Having some problems natting with my new ASA5505.The firewall is protecting my home net and I have a personal web/mail server I like to give public access to.I have dynamic natting configured for the desktops and one static nat for the server. Also I...
I'm having some problems getting my ASA5505 running like I wan't it to. To be clear this is my first ever Cisco firewall. My experience is with Juniper and Watchguard.The DMZ is just for future sake. For now the email server runs in the internal netw...
Thank you!Now that I see the commands and the diagrams in ASDM I also see what I did wrong.Cisco has a different logic to it than Watchguard or Juniper and I'm used to them.Thanks again for clarifying this.
Thanks I'll try that.To be clear, my Cisco has an external IP XX.XXX.XX.34 and the external mail ip is XX.XXX.XX.35.In your list is the IP part external or internal ips? And if external where do I define to which internal ip the traffic goes?Also all...
I got it working a little now. Apparently I can't have a dynamic nat and a static nat from the same subnet/interface.So now I can access the external network with my admin machine and mail etc is dropping in to the server. Also I made a static outsid...
The config is from ASDM. And I'm guessing there is alot wrong there. So instead of looking at that what I need is the following.Interfaces Outside,Inside and DMZ.ASA to NAT everything outgoing.I have five static IP:s and one of them is for the ASAs S...
