Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have a CSM configured to load balance a pair of servers hosting a Web Applicaiton and DNS.The Web App work sfine but the CSM seems to be ignoring the DNS requests, can anyone see a mistake here? I've attached the exerpt from the config and the o...
We have a situation where dual homed servers behind a CSM are accessed via both interfaces.A diagram is attached in ASCII.The default route on the Servers is 172.16.16.254, a VRRP address on the CSM.- Client 10.1.1.1 can successfully connect to VIP s...
Hi there!Thanks for looking at the config, which as you say should have worked, *phew* I raised a case and discovered it is a know bug:BUG# CSCek45794With the variable ROUTE_UNKNOWN_FLOW_PKTS set to 2, the CSM drops all UDP traffic that is directed ...
No, the vserver does not forward the unknown traffic, it's just the routing table of the CSM.The CSM has a gateway of the MSFC through which it communicates with the rest of the platform through the client vlan.The expected behaviour (as works for th...
Hi Gilles,I have performed a trace and the results would seem to confirm the CSM is not behaving properly.We used a 'monitor seesion 1 source vlan x' to capture the traffic on the client vlan of the CSM.The IP range used for virtual services is 10.x....
Fantastic, this connectivity is now working!That is just the kind of detailed config I needed. I hadn't found this document in my searches.I have noted that these variables are included in the config-sync which is good.Thanks Giles!
Hi Ivo,That is one avenue I am pursuing Typically a minority of people require this level of connecivity and I am looking for ways to address this through process...Rob
