Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi does anyone know about the order in which the nat rules are displayed when doing a show run. Is this configurable? What I mean is when I do a show run using 8.43 I see the 8.4 version of dynamic policy nat rules listed first, then static nat rules...
hidoes anyone know if it is still possible to run IDSM-2 in promiscious mode with the latest software? I dont see a way to enable the tcp-reset interface without running in inline mode.best regards,Ed
Hi All, I have a strange issue I have built a Lan to Lan IPSEC tunnel between an ASA5540 and a PIX515E on the ASA side there is only one subnet I need to protect but on the PIX side there are three. The tunnel is up and passes traffic but it won't pa...
Hi I have in place a 3002 client in a remote collocation facility and a 3005 central site concentrator in the main office. I am using it in NEM and can ping from the remote device to most boxes at the central site, i can also ping from one box at the...
hi all - i figured this out - for anyone interested i had to add static routes for the central concentrator internal network to the machine on the other side of the 3002 and all worked fine after this.
