Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
In my ASA 5510 config (posted below), I have an inside interface, two DMZ's, and an outside interface. I have a web server on the 1st DMZ at local address 10.1.2.2. I want this web server to be accessible from the Internet at global address xx.xx.150...
I'm trying to configure my ASA 5510 so that I can access servers in the DMZ (security-level 50) from machines on my inside network (security-level 100) and vice versa.The machines in the DMZ are on the 10.1.2.0/24 subnet and the inside machines are o...
I've noticed some strange behavior of the fans on my ASA 5510.First, are the two fans on the right side of the box (as viewed from the front) supposed to run? On mine, only the two fans on the left side of the box ever run.Second, sometimes the two f...
I have used both, so will offer my comments.I find the Netscreen CLI language (especially NAT configuration) to be more intuitive and simpler to use than the ASA CLI. The GUI is worlds better than the Cisco GUI, although the Cisco GUI is much better ...
Look for another recent post on this forum titled "ASA Software Reliability". It discusses problems people have been having with PIX OS 7.1 and 7.2. The solution seems to be to downgrade to 7.0(4) or 7.0(6).What does the TAC have to say about your pr...
