Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
In an effort to add more DSP resources to our CUBE, we added the offer-all option on the voice-class command in the dial-peer interface. I need clarification on why the following configuration results in the codecs being used for G711 to G711 calls.v...
Hi John, Sorry for not getting back to you sooner, but I was out of the office. Maybe our setup is not what we should be using. Yes our carrier does support G711 and G729. Internally, we only have G711 but in order to make carrier G729 calls we n...
I'm confused. When I make an outbound call (IP Phone -> CUCM -> CUBE -> ITSP), I send the INVITE to the ITSPsdp includes:a=rtpmap:0 PCMU/8000a=rtpmap:18 G729/8000I received ACK from the ITSPsdp includes:a=rtpmap:18 G729/8000But between the CUBE and ...
Yes we are CUCM -> CUBE -> ITSP.Our carrier supports both, but there are some DIDs that we found to be running their own VoIP platform (typically small businesses) that only support G729 for cost purposes.So we added more DSPs to our CUBE and created...
I have CUBE that connects my network to the Carrier Network. Our CUBE configuration did not support G729 when calling some Carrier destinations that only had G729. When trying to call a DID on the Carrier's network that only supported G729, the CUB...
