Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,
I have an ASA running 8.4(3) code with ASDM 6.4, and I'm having a trouble reaching a server in the internal network from outside.
It's a site with an ASA 5505 and one public IP address.
Lets say I have 192.168.78.252 on my internal lan and i...
Hi, here are the captures :
Cap capi interface inside match TCP any host <public IP> eq 80Result of the command: "Show cap capi"0 packet captured0 packet showncap capo int inside match tcp h 81.68.89.27 h <Real IP of the server>Result of the command...
Hello,
Here are the results of capture :
(wan ip on asa : 25.37.123.16, wan ip at home 81.68.89.27)
1: 21:55:40.583221 802.1Q vlan#2 P0 81.68.89.27.51332 > 25.37.123.16.80: S 1595282403:1595282403(0) win 8192 <mss 1452,nop,wscale 8,nop,nop,sackOK>...
Thanks for your response.
ACL and NAT rules have been defined, and packet tracer is working on both sides
(inside => outside and outside=>inside)
But the external access is still unavailable (trying telnet 25.37.123.16 on 8080 port)
And real-time ...
