Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm trying to determine if the logs I'm getting in CSA are an accurate report of a rootkit, or could they be false positive?CSA reports two of my hosts both XP Pro are in Untrusted Rootkit mode. error messages look similar, but using 3rd party tools ...
Hello, I'm researching the ASA platform I'm interested in Active/Active & Active/Standby configurations. I've not found any documentation (or configuration options) that would allow the IPS module to take part in the failover or loadbalance process. ...
Hello all, I'm working on a rather large deployment all Cat 65xx running IOS and designed around routed access layer. The core is a pair of 6509's each with FWSM, they need to run in transparent mode, and will be deployed in Active/Active mode. Being...
The trouble you will have is the firewall needs a default-route and it will want to send internet requests to its DG. I know for sure this setup can be done using routers running VRF (Policy-Based Routing should also work). See my attached diagram & ...
Edward, the deployment was actually fairly straight forward after digging through a few manuals. Our deployment actually shifted away from the core to a pair of L3 connected server chassis - so the same problem existed.Basically the server/inside VLA...
Hi I'm experiencing a similar problem, The http traffic (from outside to DMZ) works but we are seeing a large number of "Deny TCP (no connection)" messages in a very short time frameDec 31 2007 09:08:54: %PIX-6-302013: Built inbound TCP connection 44...
