Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am having simple issue with setting up port forwarding for RDC on ASA 5505. I have configured several other ASA 5505 appliances using the same commands and they all work fine. Here is the running config. Any help would be appreciated.Result of the...
I am trying to set up static single (1) and range (2) port forwarding on PIX 506E device using the following commands; however it is not working. What am I missing?Single Port Forwarding 1. static (inside,outside) tcp 24.172.x.x 5631 192.168.1.215 5...
I am trying to change IP address of the inside intreface and here is the message that I am receiving. I tried changing the DHCP pool first without success. BOSS(config)# ip address inside 192.168.3.1 255.255.255.0Interface address is not on same subn...
Interestingly enough show static and show access-group did not show any entries. I got all my access list displayed when using show access-list command. I ended up creating all static entries throgh PIX device manager and now all statics are displaye...
This is the only listing access-group outside_access_in in interface outside.It is still not working even after I recreated the commands. It is telling me that a duplicate entry exist.Can I configure it through PIX device manager by using access rule...
