Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
First off, the hardware: Brand new ASA 5510 7.0(6)I have a very basic setup. One public network, one private network and one management network. I run through the wizards and configure the essentials. For some reason I simply cannot get traffic to fl...
Here is my config BTW:ASA Version 7.0(6) !hostname asa5510domain-name test.localnamesdns-guard!interface Ethernet0/0 nameif public.test.local security-level 0 ip address 74.x.69.x.255.255.0 !interface Ethernet0/1 nameif private.test.local security-le...
Yeah. I ran through this guide from Cisco even and I still can't seem to get traffic from the private to the public. http://cisco.com/en/US/products/ps6120/products_configuration_example09186a00804619d8.shtml
