Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
i have gig 0/1 with dhcp range 192.168.0.2 - 100 with gateway 192.168.0.1then gig 0/3 with dhcp range 192.168.3.5 - 250 but the get gateway 192.168.0.1 instead of 192.168.3.1.How do i tell the second dhcp range to use gateway 192.168.3.1 instead of 1...
I have a database on one server with a dmz address and it will not communicate with another web server on the dmz that has a outside ip translated to dmz address. It has internet access and I can navigate the internet fine, but any server on the dmz...
I have not tried to ping the default gateway. Ill try that today when I get to the office. They can ping each other but only using the DMZ address. If I try to ping from the DB to the Web server via the live ip no go. Ill do some more testing toda...
The switch is an HP ProCurve purchased new last year. Sorry can not recall the model off the top of my head. Both servers are in an IBM blade center. Which is connect to the HP ProCurve. One other not of course the web server has a translated liv...
Both servers are on the same dmz interface. I have tried to place a hairpin on it both ways permit 10.1.10.0 255.255.255.0 10.1.10.0 255.255.255.0 no go on dmz in dmz out access-lists. Thanks for the help
