Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
is 202.X.X.43 the public IP you want to use for your exchange server? If so the static (inside,outside) 202.X.X.43 172.16.0.55 netmask 255.255.255.255 0 0 command is correct. You must then allow access on your outside access-list to the public IP for...
does your DB server talk to your web server using its DNS name? If so your DNS should be configured to return the private IP address of the web server for internal mahines and only respond with the public IP for anyone connecting from outside your ne...
you can also setup dedicated VLANs for inetrconnecting contexts. For instance you can put an interface on each context on VLAN x and then route between them. You can also bypass the MSFC this way. Although if you are planning to do it with a alot of ...
try setup a group -group add destination service sctam103:1-1 add destination service sctam104:1-1 vip address 161.19.55.8 activeI had to add this in the first time I used the CSS models as the return HTTP traffic was coming back with the real s...
