Hi, Sorry, i missed the last part. We need to make sure PIX should be running 7.x IOS image Here is the link for your reference:-http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00806e880b.shtml

Hi, Sorry, i missed the last part. We need to make sure PIX should be running 7.x IOS image Here is the link for your reference:-http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00806e880b.shtml

you can nat private ip address of server with 2 ISP's public ip address.... but only one will work at a time. When ISP1 goes down the server is access via ISP2 public ip address and vise-versa. It will only work in Active\standby scenario.. same goes...

Hi, Once you are able to uploaded the image from rommon mode and able to get to the ciscoasa> then get to the configuration prompt ciscoasa(config)# and configure the interface on which tftp server is connected then upload the same IOS image again w...

Hi Sushil, I have not gone through the complete forum but i understand you are mapping an internal machine with public ip address and you are able to access that machine from internet.I have looked at the configuration it looks gud .. you have config...