Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,
I think i am loosing my mind on this one, as again i have found a configuration that works in a version before thats not working on 9.6. I have a static PAT to open port 10022 to an internal host. :-
interface GigabitEthernet1/2
nameif DXBL...
Hi All,
We have just installed a new firewall 5506X running:-
Cisco Adaptive Security Appliance Software Version 9.6(1)
Device Manager Version 7.6(1)
And it has various routes to an MPLS:-
S 140.85.0.0 255.255.0.0 [1/0] via 10.164.115.97, ...
Hi Guys,
We have just spent time installing and configuring a cisco ASA 5506X in a small hotel where we have a number of networks that need to communicate with each other and to an MPLS. It appears to be working fine and passing traffic where needed...
I have run a capture with icmp and https requests based on source of any and destination 192.167.72.96 is the server that the other properties can access. I don't see any traffic exiting the interface to that subnet, but I do on all other subnet.
We ...
Hi Cofee, thank you for the reply, but i already have ICMP inspection enabled, but here is the configuration for the interface:-
interface GigabitEthernet1/3.300
vlan 300
nameif ASSOCIATES_VLAN300
security-level 100
ip address 10.164.114.1 255.25...
