Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have seen on few Access Points that the AP reloads with reason: Image upgrade. Post checking the logs in Prime I can the below message in event log :"'802.11a/n/ac' interface of AP ' TEST-AP12'associated to controller 'TEST-S8-WLC1(10.128.50.41)' i...
Hi All,I have an AP that has rebooted with reason "Reset Request from Controller". However, I didn't gave any reset from the WLC side.Its a 2702 series AP associating to 9800 CL WLC.Kindly advise what command can I use to fetch the log summary of thi...
I am frequently observing AP going down with reason stating: Radio reset due to (119) Max Retransmission.AP Model: AIR-AP2802E.May anyone please suggest what is causing the issue?
I do have Prime and the PI Database is updated but the logs in Prime just says " AP (IP Address) disassociated from the WLC" ,nothing else.No Alarms too.
Note your point Scott. The TDR diagnostics shows "NORMAL"Interface Speed Local pair Pair length Remote pair Pair status--------- ----- ---------- ------------------ ----------- --------------------Gi1/0/20 1000M Pair A 83 +/- 10 meters Pair B Normal ...
Thanks Scott. Will check regarding the Layer 1 issue with Local IT team. However, power looks fine.Gi1/0/18 auto on 26.0 AIR-AP2802E-E-K9 4 30.0Gi1/0/19 auto on 26.0 AIR-AP2802E-E-K9 4 30.0Gi1/0/20 auto on 26.0 AIR-AP2802E-E-K9 4 30.0Gi1/0/21 auto on...
