Hey Guys, I just set up a new Linksys/Cisco RV082 router with the intent to get VPN working from outside the building. I have gone through the setup and while everything looks good, I have not been able to connect yet. I have tried everything that I know how, and am now hoping to get the answer from some pros. Here's my setup. We use Comcast Business class internet. The modem is plugged into WAN port 1 on the RV082. I'm using the router as a DHCP server, that is working fine. My local subnet is 192.168.0.0/220 Right now all I want is to be able to log in as a client using QuickVPN. I set up one user and a client to VPN tunnel using the router's config page. Here's the settings I have: Tunnel Interface is setup on WAN1, checkbox is enabled. Local Group Setup Local Security Gatewaytpe: IP Only Local Security Group Type: Subnet IP address: 192.168.0.0 Subnet Mask255.255.255.0 Remote Client Setup Remote Security Gateway Type: IP Only IPSec Setup I left all default settings, but added a Preshared Key I have enabled all of the passthrough options, turned on PPTP server, disabled Block WAN request, and still can't establish a connection. I have even tried temporarily disabling the router's firewall completely, but that didn't help. Here's what QuickVPN logs are saying. wget_error.txt: https://*username*:*password*@70.**.**.**:60443/StartConnection.htm?version=1?IP=192.168.1.13?PASSWD=*password*?USER=*username*: Bad port number. log.txt: 2013/01/15 10:08:08 [STATUS]OS Version: Windows 7 2013/01/15 10:08:08 [STATUS]Windows Firewall Domain Profile Settings: ON 2013/01/15 10:08:08 [STATUS]Windows Firewall Private Profile Settings: ON 2013/01/15 10:08:08 [STATUS]Windows Firewall Private Profile Settings: ON 2013/01/15 10:08:08 [STATUS]One network interface detected with IP address 192.168.1.13 2013/01/15 10:08:08 [STATUS]Connecting... 2013/01/15 10:08:08 [DEBUG]Input VPN Server Address = 70.**.**.** 2013/01/15 10:08:08 [STATUS]Connecting to remote gateway with IP address: 70.**.**.** 2013/01/15 10:08:08 [WARNING]Remote gateway wasn't reached... 2013/01/15 10:08:08 [WARNING]Failed to connect. 2013/01/15 10:08:08 [WARNING]Failed to connect! It seems like something is blocking the connection, but seeing that I have tried this after disabling the firewall completely it doesn't make sense to me. I also went into the config page for the modem and set up the router as a DMZ. I have also tried connecting with the client built into Windows 7, but that doesn't work either, I just get "connection failed with error 619" I have the port in QuickVPN set to auto, but have tried both 443 and 60443 with same results. I ran a port scan at http://www.speedguide.net/portscan.php and it shows I have 3 ports open...80,443, and 1723 Any help is appreciated. ... View more