Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hey together,I have a little problem creating a network infrastucture with an "inside", "dmz" and an "outside" network on my ASA5512-x 8.6(1).I have have clients and servers with the networks 10.0.1.0/24, 10.0.2.0/24 until 10.0.12.0/24 on my inside i...
Hi Jouni,I'm so sorry. After a long time configuring a firewall and servers... I had an error in my inside webserver ip address. Everything is working fine.Thank you very very much.Sorry again for my mistake.
Hi,I thought i have to add the last line of the dmz_inside acl to allow the reverse traffic from inside ip addresses to dmz addresses. Here is the output of the packet-tracer:ciscoasa# packet-tracer input dmz tcp 10.0.254.70 55555 10.0.1.70 80Phase: ...
Hi Jouni,I reconfigured my test ASA with the following:: Saved: Written by enable_15 at 15:04:40.849 UTC Wed Jan 16 2013!ASA Version 8.6(1) !hostname ciscoasanames!interface Ethernet0/0 nameif outside security-level 0 ip address 1.1.1.170 255.255.255...
