About shbadve

shbadve · 08-06-2010

IntroductionThis document provides a sample ACL (access control list) configuration, for GSS appliance, to allow inter-GSS communication within a cluster. The packet filtering tools on the GSS instruct each device to permit or refuse specific packets...

shbadve · 06-29-2011

Hallur, Do you have same servers serving http://intra.test.org and http://webmail.test.org sites? If they are then you should be able to use the SAME sticky serverfarm under both L7 policies. That is as long as the "browser" does maintain the cookie ...

shbadve · 07-30-2010

Brian,From provided symptoms it's hard to tell, just yet, if it's a SW problem or HW.Have you tried reloading these appliances? I would start with currently ACTIVE ACE appliance.From provided stats it looks like the ACTIVE ACE is not sending any hear...

shbadve · 07-29-2010

Hello,I would suggest that you check the "show service-policy detail" output to see if the hit count for class L7unosoagat is incrementing or not.If it is and the connection is not successful then check the "show serverfarm detail" for any failed c...

shbadve · 07-27-2010

Example:class-map match-all VIP 2 match virtual-address 1.1.1.1 tcp eq wwwclass-map type http loadbalance match-all VPRSOA_EM 2 match http header Host header-value "vprsoa.test.co.uk" 4 match http url /empolicy-map type loadbalance first-match VPR...

Member Since	‎07-16-2010 05:35 AM
Date Last Visited	‎11-01-2017 03:45 PM
Posts	4
Total Helpful Votes Received	8

User Statistics

User Activity

How to configure an ACL for Inter-GSS communication?

ACE - Issue with sticky cookies - Changing subdomain ans SSO

Re: Cisco ACE 4710 FT Config

Re: layer 7 class map on ace

Re: layer 7 class map on ace